E-glass Fiberglass Continuous Filament Strand Mat For RTM (CFM)
E-glass Fiberglass Continuous Filament Strand Mat (CFM) For RTM is made of continuous fiberglass filament strand, non
woven mat containing an insoluble binder which can compatible with
unsaturated polyester, epoxy, phenolics and polyurethane resin
For moulding by injection (RTM, SRIM, Vacuum Infusion), by
compression (hot or cold).
(Compatible with UP, EP, PU resins)
ECY: E-glass Fiberglass CFM: Continuous Filament Strand Mat R: Resin Transfer Molding
300: Nominal weight per square meter (g/m2)
1040: Roll width (mm)
|Product Code||Sizing||Binder Type||Solubility in Styrene||Linear Weight of Basic Strands (tex)||Loss on Ignition (%)||Moisture (%)||Tensile Strength N/75mmx200mm|
|Roll Width (mm)||Standard Weight (g/m2)||Nominal Length (m)||Nominal Roll Weight (kg)||Nominal Weight Inndicated according to the width 1040mm|
Each roll of E-glass continuous filament strand mat is wound onto a cardboard tube with internal diameter either
3”(76mm) or 4”(101mm),individually wrapped in a stretch film and
then packed into carton box. 16 cartons per pallet.